![TOOLIOM Aluminum MIG Welder with Pulse](http://tooliom.com/cdn/shop/files/TL-250M_PRO_fa72393e-24ed-4b10-8a98-a4e8e1cb404e.jpg?v=1721887934&width=1445)
![110V/220V Dual Voltage 4 in 1 Multifunctional Welding Machine](http://tooliom.com/cdn/shop/files/TL-250M-PRO.jpg?v=1721887870&width=1445)
![Gas/Gasless Flux MIG/Lift TIG/Stick Welding Machine](http://tooliom.com/cdn/shop/files/TL-250M_PRO_0f7b0a1d-6eff-46a4-a40e-3b04df01ff31.jpg?v=1721887934&width=1445)
![Aluminum MIG Welder with Pulse](http://tooliom.com/cdn/shop/files/TL-250M_PRO_c87736a5-9671-4f84-b7ba-e824eadfc8b9.jpg?v=1721887934&width=1445)
![TOOLIOM TL-250M-PRO-NEW Aluminum Multi-Process Welder MIG/Lift TIG/Stick 3 in 1](http://tooliom.com/cdn/shop/files/TL-250M_PRO.jpg?v=1721887933&width=1445)
![TOOLIOM TL-250M-PRO-NEW Aluminum Multi-Process Welder MIG/Lift TIG/Stick 3 in 1](http://tooliom.com/cdn/shop/files/TL-250M_PRO_b91b458a-6d53-4f7d-bb31-c055722f1937.jpg?v=1721887934&width=1445)
![Gas/Gasless Flux MIG/Lift TIG/Stick Welding Machine](http://tooliom.com/cdn/shop/files/TL-250M_PRO_0f7b0a1d-6eff-46a4-a40e-3b04df01ff31.jpg?v=1721887934&width=1500)
Aluminum Welder TL-250M
- Synergic setting: The wire feed speed and current will be auto fitted by input voltage.
- Manual setting: The wire feed speed and current can adjust by welding data.
- Can be used with spool gun or MIG gun with graphite wire feed tube.
- Up to 250 A output that allows to weld mild steel up to 9/32 in plate.
- Certificated by ETL: Intelligent protection includes over-voltage, over-current, over-heat protection.
- 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)
-
Multi-functions in One
☑️ This MIG welder is capable of performing MIG (can weld aluminum) Stick and Lift TIG.
☑️ The lift TIG can't weld aluminum
-
Several Wire Selection
- “V” type drive roll for Solid welding wire-- .023"-.035"
- “W” type drive roll for Flux welding wire-- .023"-.035"
- “U” type drive roll for Aluminum welding wire-- .035"-.045"
-
Can weld Aluminum
Welding using aluminum welding wire
· the MIG gun have to install the graphite wire feed tube
· spool gun(not included)have to set the rocker switch(that is at inner of the machine)
-
Flux-Cored--(DCEN)
· Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.
-
MIG--(DCEP)
· Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (–) on the Welder.
-
Lift TIG--(DCEP)
· Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.
-
STICK--(DCEP)
· Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (–) on the Welder.
-
Material
· This MIG welder is particularly suitable for stainless steel, carbon, aluminum.
· It is perfect for home DIY and general repairing work.
-
Installation Method
· Big enough to handle 2 pounds (D100) and 10 pounds (D200) rolls of wire.
· Weld up to .040" solid/flux/aluminum welding wire.
-
Package Included
1. Work Clamp
2.Electrode Holder
3. Wire Feed Roller
4. Graphite Wire Tube
5. MIG Gun
6. Shielding Gas Hose